Using the Heavy Duty Bath Seat

The NOVA Heavy Duty Bath Seat is designed to provide a stable seating surface in a suitably sized bathtub or shower. Before sitting down, make sure the bench is level and stable, all four legs are securely adjusted to the same height, and the bath or shower is wide enough to accommodate all four legs.

Adjusting the Seat Height

The Heavy Duty Bath Seat adjusts from 17 to 23 inches high. NOVA requires all four legs to be adjusted to the same height so the bench remains level and stable.

1. Place the seat face down on a level surface with the legs facing upward.
2. Pull out the leg height adjustment clip.
3. Slide the leg to the desired height and align the hole in the leg with the hole in the seat frame.
4. Fully push the center pin of the height adjustment clip through the aligned holes.
5. Repeat the adjustment for each leg, making sure all four legs are set to the same height.
6. Make sure each leg is stable and all adjustment components are fully engaged and locked before use.

Positioning the Bath Seat

Place the bath seat inside the bathtub or shower on a level surface. Before each use, make sure the bench is stable and does not wobble and that the bathing area is wide enough to securely accommodate all four legs.

Using the Side Handles

The slots along both sides of the seat serve as handles to assist with sitting down or getting up from the bench. NOVA specifically instructs users to hold both side handles for stability because placing weight on only one side can cause the bath bench to topple.

Using a Handheld Shower Head

The round openings located in the front and rear corners of the seat can be used to hold a compatible handheld shower head. A handheld shower set is not included with the Heavy Duty Bath Seat.

Important Safety Information

• Do not exceed the 500 lb. maximum weight capacity.
• Make sure all four legs are adjusted to the same height so the bench sits level.
• Make sure all leg adjustment components are completely engaged and locked before use.
• Check the bath seat before each use and make sure it is stable and does not wobble.
• Use the bath seat only in bathtubs and showers that are wide enough to provide stable support for all four legs.
• Use the product on a level surface.
• Use both hands on the side handles for stability; NOVA warns that using only one hand on either side can topple the bench.
• Do not stand on the bath bench.
• Do not use the bath bench itself as an assistive device when entering or exiting a bathtub or shower.
• Supervision or assistance is recommended for individuals with limited mobility.
• Follow all manufacturer instructions before adjusting or using the bath seat.

Cleaning and Care

NOVA recommends regular cleaning with a non-abrasive cleaner or detergent followed by rinsing with warm water. Do not use abrasive cloths because they may damage the surface.

• Regularly inspect the bath seat and its components for corrosion, breakage, compression, or wear.
• Regularly check the legs to make sure they remain securely set.
• Make sure all four legs remain adjusted to the same height.
• Check the bath seat before each use and discontinue use if it is damaged or unstable.

Warranty

NOVA provides a Limited Lifetime Warranty on the metal frame and a one-year limited warranty on non-metal/metal parts, including rubber tips and plastic or metal hardware. The warranty is extended to the original purchaser and covers defects in materials and workmanship under normal use; it does not cover user negligence, misuse, failure to follow product instructions, normal wear and tear, or unauthorized modifications.