Using the Orthotics

The PowerStep Morton’s Extension Orthotic Insoles are designed to replace the removable factory insoles in compatible footwear. The built-in carbon fiber stability plate helps reduce motion of the big toe joint while the orthotic supports the foot from heel to toe.

1. Remove the factory insole from each shoe.
2. Select the correct size using PowerStep’s sizing chart.
3. Insert the orthotic with the fabric side facing upward.
4. Seat the heel firmly against the back of the shoe.
5. Verify that the orthotic lies flat and that the carbon fiber plate aligns comfortably beneath the first ray and big toe joint.
6. Walk for several minutes to confirm proper fit and stability.

Choosing a Size

The Morton’s Extension Orthotic is available in 10 sizes ranging from A through K, covering men’s U.S. shoe sizes 4–15 and women’s U.S. shoe sizes 6–12. Select the size that corresponds with your regular shoe size using PowerStep’s sizing chart.

Choosing Appropriate Footwear

The full-length design works best in athletic, walking, and casual shoes with removable factory insoles and sufficient interior depth.

• Remove the factory liner before inserting the orthotic.
• Use shoes with enough interior depth to accommodate the carbon fiber stability plate.
• The manufacturer recommends ordering the correct size rather than trimming because the carbon fiber plate extends close to the front edge of the orthotic.
• Verify that the orthotic remains flat and stable during walking.

Adjusting to the Support

The carbon fiber plate limits motion of the big toe joint, so the walking experience may feel different from a standard orthotic. Allow time to become accustomed to the added stability while monitoring comfort.

1. Begin with shorter periods of wear.
2. Increase wear time gradually as comfort allows.
3. If discomfort persists or worsens, discontinue use and consult your healthcare provider.

Important Safety Information

• Designed to limit motion of the first metatarsophalangeal (big toe) joint to help reduce pain and promote healing.
• Talk to your healthcare provider before using this orthotic for post-operative support.
• Do not aggressively trim the orthotic because doing so may damage the carbon fiber stability plate.
• Discontinue use if you experience increased pain, numbness, skin irritation, or pressure areas.
• Individuals with diabetes, impaired circulation, reduced sensation, or open wounds should consult their healthcare provider before using orthotic insoles.

Cleaning and Care

• Spot clean with mild detergent.
• Do not immerse the orthotic in water.
• Allow it to air dry completely before reuse.
• Do not expose the orthotic to direct heat while drying.
• Inspect the carbon fiber plate, support shell, and top cover periodically for wear or damage.

Replacement

PowerStep states that the Morton’s Extension Orthotic Insoles typically last six months or longer depending on wear, usage, and activity level. Replace the orthotics when the cushioning, support, or carbon fiber stability plate no longer performs as intended.

Manufacturer Guarantee

PowerStep offers a 60-day satisfaction guarantee when the product is purchased through an authorized retailer. The Morton’s Extension Orthotic Insoles are also HSA/FSA eligible. :contentReference[oaicite:0]{index=0}