Choosing Between the 8350 and 8351

Both NOVA 5″ Locking Raised Toilet Seat models provide the same basic benefit: five inches of additional toilet height to reduce the amount of lowering and rising required when using the toilet. The primary difference is the addition of supportive arms.

• 8350 – Without Arms: A streamlined option for users who need additional toilet height but do not require arm support.
• 8351 – With Detachable Arms: Adds foam-padded arms for additional support and leverage when sitting down and standing up. The arms can be adjusted to two width positions or removed when they are not needed.

Installing the Raised Toilet Seat

Both models use NOVA’s front-locking system and require no tools for installation. Depending on the style and size of the toilet, the raised seat may be installed with the existing toilet seat and lid attached, or the existing seat and lid may need to be removed.

1. Make sure the toilet is clean and sanitized before installation.
2. Lift the existing toilet seat and lid, removing them completely if necessary for your toilet.
3. Set the Raised Toilet Seat onto the toilet so the inner portion of the anchor insert sits inside the toilet bowl and against the back of the toilet rim.
4. Make sure the square clamp underneath the Raised Toilet Seat faces toward the inside of the toilet’s front rim.
5. If necessary, turn the front knob counterclockwise to loosen the clamp enough to properly position the seat.
6. Turn the front knob clockwise until the clamp is securely locked onto the toilet.
7. Do not overtighten the knob, as excessive tightening may damage the plastic clamp.
8. Pull upward on the Raised Toilet Seat to confirm that it is securely locked before use.

Using the Detachable Arms on the 8351

The 8351 includes two foam-padded arms that attach to telescoping tubes underneath the seat using push-button connections. The arms provide additional support and leverage when sitting down and standing up and can be removed when they are not needed.

1. Depress the brass push button on each arm and insert the arm into the corresponding telescoping tube underneath the seat.
2. Push the arm inward until the brass button engages and securely locks into position.
3. Install the arms so they lean forward, away from the rear of the toilet.
4. Choose between the two available width positions, providing either 17.75 or 20 inches of space between the arms.
5. Make sure both arms are completely engaged before using them for support.
6. To remove an arm, depress the brass push button and pull the arm out of the seat.

Checking Toilet Compatibility

Both variants fit most standard and elongated toilets, but NOVA lists slightly different sizing limits for the two models. For the 8350, the inner top rim to inner bottom rim measurement cannot exceed 14.5 inches. For the 8351, the inner rim front-to-back measurement cannot exceed 14.75 inches. Check the dimensions of your toilet and your selected model before installation.

Important Safety Information

• Do not exceed the 300 lb. maximum weight capacity of either model.
• Make sure the Raised Toilet Seat is securely locked to the toilet before each use.
• After installation, pull upward on the Raised Toilet Seat to verify that the front locking mechanism is securely engaged.
• Do not overtighten the front adjustment knob, as this may damage the plastic clamp.
• Apply even pressure around the Raised Toilet Seat during use.
• When using the 8351, make sure both arms are fully engaged and securely locked before using them for support.
• Regularly inspect the seat, locking mechanism, and arms, if equipped, for damage or wear.
• Discontinue use if the Raised Toilet Seat is damaged, unstable, or cannot be securely attached to the toilet.
• Follow all manufacturer instructions before installation and use.

Cleaning and Care

Keep the Raised Toilet Seat clean and regularly check that the front locking clamp remains securely engaged. NOVA recommends cleaning its raised toilet seats with an appropriate toilet sanitizer or cleanser. When using a non-abrasive cleaner or detergent, rinse with warm water and dry completely.

• Clean the Raised Toilet Seat regularly.
• Use an appropriate toilet sanitizer, cleanser, or non-abrasive cleaner or detergent.
• Rinse with warm water and dry completely when appropriate for the cleaner being used.
• Avoid abrasive cloths that could damage the surface.
• Check the locking mechanism regularly to make sure it remains secure.
• On the 8351, regularly inspect the padded arms and push-button connections for damage or wear.

Warranty

NOVA lists a Limited Lifetime Warranty on the metal frame and a one-year limited warranty on non-metal/metal parts for both the 8350 and 8351. Warranty coverage applies according to NOVA’s terms and conditions.