Adding Comfort to a Shower Seat

Bath and shower seats provide a stable place to sit while bathing, but their firm seating surfaces may not be comfortable for everyone. The Vive Shower Seat Cushion adds 1.5 inches of soft, supportive EVA foam between the user and the seat to make seated bathing more comfortable.

Pressure-Distributing Support

The soft yet resilient EVA foam conforms to the body’s contours to help distribute pressure more evenly across the seating area. Vive designed the contoured surface to help relieve pressure around the hips, reduce stress on the lower back, and encourage more comfortable positioning while seated.

Designed Specifically for Wet Environments

Unlike conventional seat cushions, the Vive Shower Seat Cushion is made from 100% waterproof EVA foam. The material does not need a fabric cover, making the cushion well suited for use in the bath or shower.

Built-In Drainage

Drainage holes throughout the cushion allow shower water to pass through instead of pooling on the seating surface. The openings also promote airflow and help the cushion drain and dry after bathing.

Slip-Resistant Design

The cushion is designed to resist slipping and shifting while positioned on a bath or shower seat. Vive states that the cushion is designed to remain securely in place even under heavy shower water flow.

Using the Shower Seat Cushion

The cushion requires no assembly or complicated installation. Simply place it on top of a suitable bath or shower seat before bathing.

• Place the cushion flat and centered on the shower or bath seat.
• Make sure the cushion is stable before sitting down.
• Position the cushion so the user can sit comfortably without interfering with the safe use of the shower chair or bath seat.
• Allow water to drain freely through the built-in drainage holes during bathing.
• Remove or reposition the cushion if it does not sit securely on the particular bathing surface being used.

Lightweight and Portable

At just 1.05 pounds, the Shower Seat Cushion is easy to move and transport. It can be removed from the shower seat for cleaning or drying and is convenient to take along when a cushioned seating surface is needed while traveling.

Important Safety Information

• Always make sure the cushion is sitting flat and securely positioned before use.
• Use the cushion only on an appropriate, stable seating surface.
• The cushion does not replace the safety features of a properly sized and installed bath or shower seat.
• Do not use the cushion if it interferes with the stability or safe use of the shower chair or bath seat.
• Inspect the cushion regularly and discontinue use if the EVA foam becomes significantly damaged or torn.

Cleaning and Care

The waterproof EVA foam construction makes routine care simple. Vive recommends spraying the cushion with disinfectant, rinsing it thoroughly, and allowing it to air dry.

• Spray the cushion with an appropriate disinfectant.
• Rinse thoroughly after cleaning.
• Allow the cushion to air dry completely.
• Keep the drainage holes clear so water can continue to drain freely.