Using the Stander Step

The Stander Step is designed to provide minimal to moderate weight support while standing and stepping. Its wide platform and two handles can be particularly useful beside a tall bed, and the free-standing design means the unit does not need to attach directly to the bed.

Positioning the Step Beside a Bed

When using the Stander Step at the bedside, Stander instructs users to position the rear crossbar in contact with the bedside and to avoid leaving a gap between the product and the bed frame or mattress. The product should be positioned at least 12.5 inches from the head and foot plane of the bed as directed in the owner’s manual.

• Place the Stander Step on a stable surface beside the bed.
• Position the rear crossbar in contact with the bedside.
• Do not leave a gap between the product and the bed frame or mattress.
• Keep the product at least 12.5 inches from the head and foot plane of the bed.
• Check the product before use to make sure it has not shifted from its proper position.

Adjusting the Handles

The two handles can be adjusted from 27 to 32 inches high. Insert each handle into its front receiver post, adjust it to the desired height using the witness holes, and securely tighten the adjustment knob before use.

Adjusting the Step Height

The landing platform is height adjustable using spring-button legs. Adjust each leg to the desired setting and make sure every spring pin is completely locked into place before use.

• Adjust all legs to the same height.
• Make sure each spring pin fully engages before stepping onto the platform.
• Check the product for stability after making any height adjustment.

Using the Motion-Activated Light

The included LED light attaches magnetically to the rectangular plate on the rear crossbar. The light is USB rechargeable and activates when its switch is in the ON position, motion is detected, and the surrounding light level is sufficiently dark.

• The motion sensor has a range of 3 meters.
• The light turns off approximately 15 seconds after motion is no longer detected.
• The LED light is rechargeable by USB.
• Keep the light away from water and damp areas.
• Keep the light away from extreme heat.
• Bright-light exposure can affect the sensitivity of the ambient-light sensor.

Important Safety Information

• The Stander Step is intended for adult use and provides minimal to moderate weight support while standing.
• Do not use the product if the user weighs more than 300 lbs.
• The landing step itself is rated by Stander to support up to 500 lbs.
• The user must have sufficient hand strength to securely grasp the handles while standing without slipping.
• Do not use the product if it is damaged, broken, missing parts, or has shifted from its proper position.
• Do not alter the product or use it for a purpose other than providing limited support during standing and sitting.
• Check the product daily to make sure it is correctly positioned, undamaged, clean, and free from anything that could make the product or floor slippery.
• Do not allow children to hang on or play with the product.
• Do not attach additional items or objects to the product.
• Follow Stander’s complete eligibility, positioning, assembly, and entrapment warnings before using the Stander Step beside a bed.

Cleaning and Care

Stander instructs users to clean the Stander Step with warm water and soap and dry it thoroughly before use. Check the product daily for damage, proper positioning, and any substance that could make the product or surrounding floor slippery.

Warranty

Stander provides a Limited Lifetime Warranty to the original purchaser covering material defects in materials or workmanship for the lifetime of the product when it is used according to Stander’s specifications. The warranty does not cover damage, unauthorized alterations or attachments, improper installation, use outside the product’s intended purpose, abuse, misuse, neglect, accidents, or abnormal use or storage.