Using the Suction Cup Grab Bar
The NOVA 12″ Suction Cup Grab Bar is intended to provide an additional handhold for balance or assistance in the bath, shower, or another compatible area. Because the bar relies entirely on suction rather than permanent mounting hardware, always confirm that it is securely attached before relying on it for support.
- Choose a completely smooth surface with enough room to accommodate both suction sections of the grab bar.
- Make sure there is a completely smooth 3.5-inch-diameter area beneath each suction section.
- Push the grab bar against the smooth tile or other compatible surface.
- Push down on the Push Down/Release tabs to secure the suction cups.
- Confirm that the suction indicator displays green before use.
- Test the grab bar to make sure it is securely attached to the surface before relying on it for support.
Checking the Suction Indicator
The built-in suction indicator provides a visual way to check the attachment before using the grab bar. NOVA instructs users to confirm the indicator color and physically test that the bar is secured before each use.
- Green indicates that the suction is secured and ready for use.
- Red indicates that the grab bar is not securely attached to the wall or surface.
- Do not rely on the grab bar for support when the indicator shows red.
- Always test the grab bar for secure attachment before use, even when the indicator shows green.
Choosing a Compatible Surface
Proper surface selection is essential because the grab bar depends on suction for its attachment. NOVA specifies that both suction sections require a completely smooth 3.5-inch-diameter area.
- Use only where both suction sections can make full contact with a completely smooth surface.
- Make sure each suction section has a completely smooth area at least 3.5 inches in diameter.
- Do not rely on the grab bar if either suction section cannot form a secure attachment.
- Confirm that the indicator shows green and physically test the attachment before use.
Removing and Repositioning the Grab Bar
No tools are required to remove or reposition the grab bar. The Push Down/Release tabs control the suction attachment, allowing the bar to be detached and moved to another compatible smooth surface when needed.
Traveling with the Grab Bar
NOVA specifically describes the 8212-R as suitable for travel because it requires no tools or permanent installation and attaches or detaches in seconds. Before using it away from home, make sure the new location provides the completely smooth surface area required for both suction sections.
Important Safety Information
- The maximum weight capacity is 300 lbs.
- Always make sure both suction sections are securely attached before using the grab bar.
- Confirm that the suction indicator displays green before use.
- Physically test the grab bar to make sure it is secured to the surface before relying on it for support.
- Do not use the grab bar when the suction indicator displays red.
- Each suction section requires a completely smooth 3.5-inch-diameter surface area.
- Do not use the grab bar if either suction section cannot form a secure attachment to the surface.
Cleaning and Care
NOVA’s current product page does not list specific cleaning instructions for the 8212-R. Keep the grab bar, rubber grip, suction sections, and mounting surface clean and follow the care instructions supplied in NOVA’s user guide.
Warranty
NOVA lists a one-year warranty for the 12″ Suction Cup Grab Bar.
